Monday, December 26, 2016

How to install Renault CAN CLiP v163 software

Here is a the new Renault CAN CLIP V163 ISO file to download and CLIP v163 installation tutorial offered by a forum member @toto. Put it here for the educational purpose.
renault-can-clip-interface-2
Renault clip v163 iso download:
Renault CAN-CLiP Registration Patch V3.0.zip:
Renault can clip diagnostic tool:

BEFORE you start your Renault CLIP installation, please do the following steps:

  1. Uninstall ANY previous "OLD" Version from V116 and BACK Renault CAN-CLiP if you have!
(IF ALL READY you have ANY Version from V117 --> & UP, just you can make an Update
with this LATEST Release...)
NOTE: IF you making an update and you got the message about "NOT CLiP Platform"
just re-apply the "Crack! Reanult CAN-Clip.reg" and then move on.
CLiP it will tell you "1st Installation", but DO NOT worry!
Just move on as usual...

  1. IF you making your 1st Installation: Run the "Crack! Reanult CAN-Clip.reg" 1ST OF ALL!

After these steps done, install now this NEW Renault CAN-CLiP Version.
NOTE: Manage about the Language that you want to use, to have ALL READY
configured your Regional & Language Settings in your Control Panel!
Example: You want to Install & to use your CLiP with Greek Language! :)
Then use Greek Language in your Regional & Language Settings in your
Control Panel in: Regional Options (2x options) & in Advanced (1x option).



After installation finish your PC will Reboot automaticaly!
IF when you log-on on your Windows the Setup NO start again automatic
for to finish 1x last step, browse your DVD/Image and run again the Setup.exe!
In some seconds you will notice 1x Message about Successful Instalaltion.


Now you can use the "NEW Renault CAN-CLiP Registration Patch V3.0" for to Register your CLiP! :)



Before your 1st REAL Operation with the Program make these steps:

You NEED to have 1 Renault Car (and ALWAYS Renault CLiP Running/Working FULL)
when you have Renault Car!
  1. Connect your CLiP Sonde or your VI Probe Interface 1st in your Car (OBD Slot)
  2. Turn Ignition ON (NOT Engine to running...)
  3. Connect now your CLiP Sonde or your VI Probe Interface via USB cable with your PC
  4. Start to installing ALL the Drivers (that they will appearing) and
you can find those in: C:\WINDOWS\system32\drivers\
  1. You MUST Install 4x Drivers (4x TIMES the same thing!) about CLiP Sonde,
and 2x about VI Probe.

When you finish with the drivers, you can RUN now finally your NEW CAN-CLiP Software...

LAST & IMPORTANT TIP: Manage ALWAYS to have from the Car GOOD Power!
Try as you can to using External Power Supply to the Car!
Ranault CLiP Sonde (especially the Clones!) they are VERY SENSITIVE!

Enjoy & Good Cliping! :)

(BIG THANKS to @toto)

Thursday, December 8, 2016

Software BMW INPA Windows 10 for K+DCAN Cable

Here is an easy way to install BMW Standard Tools to work with K+DCAN USB cables, developed by dallas.dainers and proved to be done in less than 15 min depending on the processing power of your machine.
The only requirement for this install:
Windows XP through Windows 10, 32 or 64 bit version
a working K+DCAN cable
INPA and installation tutorial download:
(the instructions that's included in link)
NOTE: For everyone who's having issues setting the default folders, it is because some of the downloads excludes "empty" folders. Therefore, make sure your folder structure on the C drive are as follows (if you're missing a particular folder, create an empty one):
C:\EC-APPS\INPA:
BIN
CFGDAT
DEMO
DOKU
english
english.met
HELP
PRT
SGDAT
source
C:\EC-APPS\NFS:
BATCH
BIN
CFGDAT
DATA
DOKU
FORMAT
KMMDAT
SGDAT
TRACE
WORK
C:\EDIABAS:
API
BIN
DOKU
ECU
HARDWARE
HELP
SIM
TRACE
TUTORIAL
C:\NCSEXPER:
BIN
CFGDAT
DATEN
PFL
SGDAT
STDAT
TAB
VERPLATZ
WORK
Chassis family guide for choosing your proper DATEN:
bma-inpa-chassis-family
Edit 1: Added F series files for INPA software. Added support files for N47.
Edit 2: Added working copy of NCS Dummy.
Edit 3: Updated DATEN link.
Edit 4: Added notes about setting default folders in BMW Coding Tool.
Edit 5: Updated DATEN link to 60.0.
(big thanks to dallas.dainers)

Monday, December 5, 2016

OBDSTAR X300M change 2008 Volvo S80 mileage easily

This post is going to demonstrate how to change 2008 Volvo S80 mileage using OBDSTAR X300M odometer correction tool. It is easy! Steps are as follows:
Turn car ignition on and we can see the original kilometer is 70106.
obdstar-x300-m-change-volvo-s80-mileage-1
Connect OBDSTAR X300M with car. Choose “Vehicles”→ “Other models” → “Other models V30.51”.

obdstar-x300-m-change-volvo-s80-mileage-2
obdstar-x300-m-change-volvo-s80-mileage-3
Choose “Volvo” → “S80” → “07-”
obdstar-x300-m-change-volvo-s80-mileage-4
obdstar-x300-m-change-volvo-s80-mileage-5

Select “Mileage adjustment” function
obdstar-x300-m-change-volvo-s80-mileage-6
It will ask to turn ignition on, press the Enter button to confirm.
Then it will ask to turn ignition off, so turn it off and press the Enter button.
Now it is reading the mileage, this process may cost a while.
After that we enter a number to name the mileage data file.
obdstar-x300-m-change-volvo-s80-mileage-7
Next OBDSTAR X300M will read out the original odometer as 70104. (It’s OK for the real value 70106)
obdstar-x300-m-change-volvo-s80-mileage-8
So we press the Enter button to continue, input a new odometer value as 93520 and confirm that.
obdstar-x300-m-change-volvo-s80-mileage-9
Now it is adjusting the mileage after that operation success.

obdstar-x300-m-change-volvo-s80-mileage-10
obdstar-x300-m-change-volvo-s80-mileage-11
OBDSTAR X300M change Volvo S80 mileage successfully!

Free Software Download GM Tech 2 PCMCIA bin file multi-language

As we konw There are many free software in car diag tool website
so there are some of car tool software maybe fit for you
 There is software that can reprogram the 32MB PCMCIA card within the GM Tech2 diagnostic scanner via serial cable with bin files. Here gathering some download resources of the Tech II PCMCIA bin file with multi-language and versions.
How to load software on Tech2 scan tool 32GB card?
Insert tech2 card into pcmcia port on laptop and use mce to write the required bin to card, once done remove card and place in tech 2 and power on.
Tech2 card writer is one of them but the method is much slower then reprogramming in pcmcia slot. Tech2 card writer can be downloaded free below as well.
Disclaimer: You are on your own risk.
NO PASSWORD.
File including:
New version Tech2 PCMCIA 165.000.rar English (used with TECH2 or with TECH2WIN)
Opel German 164.000.zip
Opel German 154.000.zip
Opel 150.020 english.rar
Opel_161.002.rar
Saab 148.000 English.rar
SAAB 148.000 32MB German
TECH 2 OPEL VAUXHALL V159.001.rar
Tech2-cardwriter.rar

Download 2:
https://mega.co.nz/#F!JlhF2STa!8ElYLExLisPlBaRbIX5sjQ
Tech2 & Tech2Win PCMCIA 32GB Card Bin Files Opel Multi-Language
You have inside:
Opel 165 EN; DE ; FR ; IT
Opel English 165, 171, 172 and 175
Tech2Win v2.302
27.05.2015 – Added Opel version 176
Download 3:
http://www.filedropper.com/tech2cards
Tech 2 cards bin files in English:
Zip file contains:-
Cadillac 117.500.bin
Cadillac BLS 120.000.bin
Opel GT Chevrolet HHR V30.004.bin
China-1 29.002.bin
Holden 1997 – 2012 V157.000.bin
Saab 148.000.bin
Holden Export V149.000.bin
Saturn Astra V31.001.bin
Isuzu 107.021.bin
Suzuki 28.007.bin
Isuzu truck 11_530 1996-2011.bin
Isuzu truck 11_530.bin
ISUZU Truck CAN 122_050.bin
Suzuki 29.003 eng.bin
V33-002_NAO_EN.bin
nao 32.08.bin
vauxhall.bin
opel 137.000.bin
opel_160-000_en.bin
OpelVauxhall V166.00.bin
NOTE:
Tech 2 32MB memory PCMCIA is available here:
Tech2 32MB B Card
http://www.wobd2.com/wholesale/gm-tech2-diagnostic.html
TECH II 32MB C Card
http://www.wobd2.com/wholesale/gm-tech2-32mb-card.html

Thursday, November 24, 2016

Network connection when update bmw e87 maps using enet cable.

It’s a typical question and answer to setup IP address and network connection when update bmw e87 maps using enet cable.
Model: BMW E87
Purpose: to update 2010s maps
Devices i have: obd connector; enet cable bmw;
Puzzles:
have tried several different IPs, the closest i could get to accessing the cars computer was an error message, that password or username was incorrect.
In windows, under network and adapter settings it says that i don't have network connectivity. How to the LAN network, in some specific way? The problem seems the network settings, since even itoolradar doesn't show any IPs.
Ps. i have tried to access the fsc through browser, filezilla and the SWID software, additionally tried it under linux, but no luck.
 
Suggestions from an experienced user in a bmw forum:
As you know you can't acquire 1b file through DCAN cable, so forget about EDIBAS, the only option beside ICOM A2 is ENET cable i.e. ethernet adapter.
There are 3 different IP addresses assigned to clients by CIC (that I know):
169.254.199.98 (mask 255.255.255.0, gateway and ftp server address 169.254.199.99)
10.250.89.3 (mask 255.0.0.0, gateway and ftp server address 10.250.89.2)
160.48.199.98 (mask 255.255.255.128, gateway and ftp server address 160.48.199.99)
If none of those IP addresses work, then you need to set your PC to DHCP mode using TFTPD64. Then CIC will get IP address from your PC's DHCP.
You can check which address CIC got using Tool32 (when you are connected to it with DCAN, and ENET cable is on USB), load CICR.PRG and start the Job "status_get_ipconfig".
For example set your PC to a static IP address (e.g. 192.168.10.10/255.255.255.0) Launch TFTPD64 and bind it to your wired adapter. Under the options tab, set the start address to 192.168.10.20 with at least 2 for the pool size. Reboot your CIC by pressing the VOLUME button for about 30 seconds. The CIC will now be accessible at the address you specified, 192.168.10.20 in this case.
Hope this helps, if it doesn't then your CIC is most probably not wired to OBD and then your only chance is USB-Enet adapter with ASIX chipset.
http://www.worldobd2.com/

Sunday, September 11, 2016

Real review on AUTOPHIX OBDMATE OM123 OBDII EOBD CAN Car Code Reader

My car regularly throws a Check Engine code, Every time I had it cleared by a friend with AUTOPHIX OM123 code reader it was something trivial that didn't affect engine performance. I was getting fed up with borrowing my friend’s code reader once a month so I bought myself one. I'm glad to say it worked exactly as expected.
It came in a plastic shell pack with a manual. I plugged it into my car, turned the car's ignition key to on (engine off), and pressed a key on the scanner. From there, the menus were pretty easy to use. All the functions worked, the display was easy to read. This scan tool showed freeze frame data and live data (numbers), which some of the other scan tools in this price range and cheaper can't (they just show codes). It looks like the price went up to $35 recently, but I think it's still not bad and worth this price.
autophix-obdmate-om123-obdii-eobd-can-car-code-reader
Here's a few things I noticed about this code reader:
- Very straightforward user interface
- I had no trouble turning it on, reading the codes, clearing the code without checking the user manual
- The screen is clear and easy to understand
- It presents trouble codes in a clean and straightforward way
- There is a short description of the trouble code instead of just a cryptic number
- All components feel like they are good quality
- Buttons feel decent to press
- Works immediately after being plugged in

Combining this with a quick internet search to check in depth what the codes mean has made my life easier. My car is old enough and it's not worth having such a trivial problem fixed for hundreds of dollars, so it's good to have a code reader so I don't need to be faced with the bright orange Check Engine Light every 1,000 KM of driving. If you're in a similar situation as me or you're looking at paying about $50 to a mechanic to read your engine codes, I would recommend getting this one. So far this reader has worked great and I've had no issues with it.

Friday, August 19, 2016

CN900 MINI Introduction

How much do you know about the new product CN900 Mini Key copy machine, here I will offer V1.9 CN900 free download link and make a brief introduction of this version.

V1.9 CN900 mini Software Free Download:

CN900 Mini image:
mini-cn900-key-programmer-01

What’s Advantages of V1.9 Smart CN900 Mini transponder Programmer?
  • Language: English/Chinese
  • Can directly copy 4C and other chips like Toyota 4d67
  • Support copy 4D chips
  • CN chips can be copied many times
  • Can recognize locked ID48 and can unlock ID48
  • Support copy 46 chips
  • Toyota G Chips Clone.
  • CN900 MINI support all function of CN900, and it doesn't need connect with decoders to copy 4D, 4C, 46, G chips.

CN900 MINI Introduction:
  • RFID identify 125KHZ 134.2KHZ 13MHZ
  • RF data reception 27-900MHZ
  • RF radio frequency identification, support all kinds of remote controls
  • RF Data transmission, supports all kinds of remote control simulation test
  • Various types of vehicle anti-the fault detection, matching detection
  • Portable Super long standby
  • Support four kinds of frequency 850/900/1800/1900MHZ
  • GSM/GPRS SIM
  • USB2.0
  • Bluetooth4.0
  • As for the products improvements, specifications are subject to change

CN900 MINI Main Features:
*Function 1:
1) Read out the chip code for 11 12 13 33 T5 40 41 42 44 45 46 48 4C 4D 8C and 8E chips. With the detail format for ID 48 and 4D Chips.
2) New identify functions for Toyota "G " chip key  (year: 2010) (Chip: 4D-72).
And it will show if the key is the main key or the vice key for Toyota, and later will add new identify function for the Chinese Car.

*Function 2:
It can identify Toyota smart key, and read out the data.

*Function 3:
It supports on copying the chips (11 12 13 33 T5 41 and 42) and parts of 44 and 45.
Using "FREE" dedicated chips can copy none battery 4C and 4D chips directly. (Remark: cn1 (4C), cn2 (4D) is the name of special chip)

*Function 4:
Connecting with Chinese PC software, it can save the read key code data unlimited.

*Function 5:
Support on the chip programming: with the inner function of HITAGETI, it can write ID 46 Renault Crypto chips.

*Function 6:
Without removing the ECU (Benz W140), it can start the chip.

*Function 7:
It can unlock the 48 chips except the crypto lock 48 chips.

*Function 8:
Support on the pin code calculating for Hyundai and Kia (before 07 year), by using the Last 6 Codes of VIN Number.

*Function 9:
Support on starting the key and calculating the pin code for more than 60 kinds of cars.
Support on programming all kind of Fiat key, such as (11, 13 and 33), These 3 kinds of 48 chips anti-theft way

*Function 10:
It Upgrade to identify HONDA_46 CRV_46/CIVIC_46/ Mitsubishi 46
Ordinary 60 can be programmed to be 66/67/68/71/74

*Function 11:
It Upgrade to copy CN1 (4C), CN2 (4D) chip .And size is 6mmX12mmX4mm
Support on the software update, such as adding new function for copying the induction card for Electronic Gate.

*Function 12: Can copy all ID46 chip:
BMW 46 chip;
ACURA 46 chips;
Honda CRV FIT (NEW) Accord (2008) Civic 46 chips;
Mazda Haima 46 chips;
Mitsubishi 46 chips;
Buick GMC CRUZE 46 chip;
New Chery Tiggo A3 46 chips;
Nissan TIIDA TENNA LIVINA Sylphy Nissan QASHQAI Q35 46 chip;
Brilliance 46 chip;
Peugeot/Citroen 307 206 -46 chips;
Triumph Senna 406 (2001year);
Picasso 46 chip;
Suzuki swifts SX4 46 chip;
Land Rover FREELANDER 46 chip;
Geely dedicated 46 chip

*Function 13:
Can copy 4D chip

*Function 14:
Toyota G Chips Cloner

FAQ for Mini CN900:
Q: Does CN900 Mini require to connect with computer when do RF data reception, RFID identify etc?
A: Mini CN900 PC software will be released soon. Software currently not available.

Q: Can I read EEPROM with X-PROG, connect MINI CN900 with computer to program EEPROM key?
A: Yes, but technical skill is required.

Q: Can this Mini cn900 read Kia pin code?
A: Sorry, it can’t.

Customer Feedback: 
  1. Surely the cn900 mini is a better buy for the price can anybody confirm that the decoders are built in for 4d and 46 on mini cn900 if so is a winner as handy baby twice the price.
  2. Personally I clone a Ford 4D63 into a cn2 chip with mini cn900 and a friend told me he clone a Toyota G chip into a cn5, no internet or decoder box, will keep testing as times go.

Thursday, August 18, 2016

GM TECH2 Scanner Price

GM TECH2 Diagnostic Scanner Price with multi-languages, TIS2000 Programming CD, CANDI interface, update via 32MB Card, multi car model software to choose,Support GM,SAAB,OPEL,SUZUKI,ISUZU and Holden. One GM Tech II Scanner can be used on all GM vehicle applications.

GM Tech2 Professional GM Diagnostic Tool for GM vehicles.It supportsall GM systems from 1992 to 2014.
gm tech2

GM Tech2 Scanner specification:
1) Dimensions: 12
2) Microprocessor: 32 bit,16 MHz
3) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
4) Communications: Integral RS232 communication port.
5) Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)
 
GM TECH 2 -6
GM Tech2 Features:
1) Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru 2011.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.
gm-tech2-gm-diagnostic-scanner-main-unit

For GM 
For GM-English 33.004 1991-2014 (Newest software)
For GM-Germany 32.007 1991-2013
For GM-Spanish 32.008 1991-2013
For GM-Italian 32.006
For GM-Japanese 32.006 1991-2013
For GM-French 32.008 1991-2013
For GM-Thai 32.008 1991-2013
For GM-Dutch 32.006
For GM-Portuguese 32.008 1991-2013
For GM-Korean 32.008 1991-2013
 
For OPEL
For OPEL-English 1997-2014 165.000 (Newest software)
For OPEL-Italian 133.001 1997-2012
For OPEL-Germany 85.001 1997-2008
For OPEL-Spanish 91.001 1997-2009
 
For SUZUKI
For SUZUKI-English 01.210.020
 
For SAAB
For SAAB-English 148.000 1998-2013
 
For ISUZU
For ISUZU-English 107.021
CAN-BUS: 2010- (CAN-BUS support car models after 2010)
K-line: 1996-2011 (K-line support car models from 1996 to 2011)
(Please select one: CAN-BUS or K-line)
 
For Holden
For HOLDEN-English  149.000 1999-2013
 
 
Tech2 Vehicle CAN Interface:
05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)
05 Chevrolet Equinox (3.4L)
05 Chevrolet TrailBlazer (5.3L)
05 Chevrolet SSR (6.0L)
04 Chevrolet Malibu (Body/Chassis only)
05 Chevrolet Malibu (3.5L)
05 GMC Envoy (5.3L)
05 Pontiac G6 (3.5L)
05 Pontiac GTO (6.0L)
05 Pontiac Pursuit (2.2L)

 

GM Tech2 Clone Sale


 

How to use GM TECH2 Diagnostic Scanner








Other Relation GM Tech2 :

Saturday, July 23, 2016

TCS CDP pro DS150E 2015.3 2014.3 2014.1 2013.3 Free Download

Free download link for the latest DS150E 2015.3 2014.3 2014.1 2013.3 here for TCS CDP pro+ or Multidiag pro!!

Operating system: Windows XP (better)/Windows 7


2015r3 software


free download de150e 2015.3 (clone)
https://mega.nz/#F!wBQlTBCT!tCm5jhowbLZ2nQWpaLBiXg
http://goo.gl/35RzDM (Tested OK)

worable device:
2015.R3 TCSCDP Pro+ with Bluetooth 

2015.R3 TCS CDP+ PRO without Bluetooth

(New Design) v2015.3 TCSCDP Pro+ OBD2 scanner without Bluetooth

(New design) 2015.R3 TCSCDP Pro with Bluetooth and 4G Memory Card

2014r3 software


free download ds150e 2014 & 2013(clone)
China ds150e 2014.1
http://goo.gl/Z6Ddo7
China ds150e 2013.3
http://goo.gl/Z6Ddo7
attached file:
DS150E WIN7 User guide German.pdf

workable device:
TCSCDP & Multidiag pro, including

TCSCDP Pro+ 2014.R3 without Bluetooth

Multidiag pro with single PCB:
multidiag pro DS150E Bluetooth,
multidiag pro DS150
Bluetooth Multidiag pro for car and truck DS150 + WOW
Multidiag pro with double PCBs:
Bluetooth multidiag pro+ DS150
v2014.3 Mutidiag pro DS150E Bluetooth

Tips of running CDP/Multidiag pro software:Please disable/uninstall anti-virus software before download this software!
Please note,anti-virus software can flag up this product software as having a virus. This is a false positive and is due to the software containing the application file like .exe. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable virus scanner! Our product software is completely safe and virus free and all other virus scanners confirm this.

basic information for reference:
Feature:
1. With CARS, you are able to perform brand specific diagnostics for cars and light vans from 1988 onwards. A total of 47 different brands.
2. With Truck software package, you are able to perform brand diagnostics for light and heavy vehicles,buses and trailers from 1995 onwards.
3. The diagnostic program is designed for the legislation based diagnostics, specially targeted for emission related fault codes.
4. Support multiplexer function, 2xHS CAN (ISO 11898-2), SW CAN (SAE J2411), K/L (ISO 9141-2), RS485 (J1708), TTL and (SPI, analog in, 5volt out).

Functions:
Multi Color Indicator  With the multi colour indicator on multidiag pro, you have full control of the diagnostic process. Different colors and sound communicates the status and the placement of the indicator allows you to see it from a far. For example, if the indicator alternates between blue and green the Multi-diag pro + is in communication with the vehicle control unit.

Connector with LED To locate the diagnostic connector in the vehicle with ease, even if it’s located in a dark and inaccessible place, there is a LED on the 16-pin connector to help you along. The location and the design allows the light to function even when using the adaptor cable for vehicles without a 16-pin diagnostic socket.
Voltage Check  When Multi-diag + is connected to the vehicle, the unit will check the battery voltage of the vehicle and automatically adjusts itself to the vehicle’s voltage level of 12 or 24 volts. If the voltage gets too high or too low, Multi-diag + will warn you with both sound and light and you will also be alerted through the battery icon in our diagnostic software.

Chassis Number Vin In our CARS software, we have a smart function that allows you to read out the chassis number from the vehicle that you would like to diagnose. This ensures that the right model and year is selected automatically. In addition, engine code for vehicles, which are commonly available on the markets, is also selected automatically.
ISS Intelligent System Scan (ISS) scans through all the systems in the vehicle and displays the fault codes that are stored in each system. This saves time and you get a quick overview of the actual status of the entire vehicle. When the ISS is complete, you can then select a specific control system to analyse the results further on.

ISI Intelligent System Identification (ISI) identifies and selects automatically the type of controller that is mounted in the vehicle. This ensures that the diagnostic session is performed correctly with the correct parameters as required.Report Function  Under this function tab, you will be able to see the adaptations and adjustments that are possible for a specific vehicle without having the vehicle near you. Together with the help texts as a guide, you can plan and be effective in your work; even under complex situations.

OBD-Function multidiag pro+ is equipped with an unique multiplexer technology, which allows it to be used on all types of vehicles, regardless of voltage levels and communication standards. For those vehicles that do not use the standard 16-pin connector, we offer a complete set of certified and customized adapter cables and kits.

Help Function For most OBD functions, such as adjustments and programmings, there are detailed instructions and help texts to assist you in your diagnosis work. You will find step by step information about prerequisites, preparation and implementation of various functions; making even the most complex function simple to perform.


Vehicle makes you can try:

Abarth, Acura, Alfa Romeo, Audi, Bentley, BMW, Cadillac, Chevrolet, Chrysler, Citroen, Dacia, Daewoo, DAF, Daihatsu, Dodge, Ferrari, Fiat, Ford (Europe), Freightliner, General Motors, GMC, Honda, Hummer, Hyunda, iIsuzu, Iveco, DVD, Jaguar, Jeep, Kia, Lamborghini, Lancia, Land Rover, Lexus, Lotus, Mahindra, MAN, Maserati, Mazda, Mercedes-Benz, Mercedes-Benz (Truck), MG, Mini, Mitsubishi, Nissan, OBDII, Opel, Peugeot, Porsche, Range Rover, Renault, Renault Trucks, Rolls-Royce, Rover, Saab, Scania, Seat, Skoda, Smart, Sprinter, Ssangyong, Subaru, Suzuki, Tata, Toyota, Vauxhall, Volkswagen, Volvo, Volvo Trucks

source:
http://www.obd2express.co.uk/search/?q=cdp
http://www.obd2express.co.uk/search/?q=multidiag
BMW F series coding with ENET coding cable